廃酸処理で副生する酸化鉄からの鉄粉
スポンサーリンク
概要
- 論文の詳細を見る
Iron powders were made from iron oxides by the method of reduction with coke and subsequently with hydrogen. These iron oxides were obtained as a by-product from waste pickling liquor in steel industry. Various properties of these iron powders were tested and measured. The characteristics obtained were as follows:<BR>1) Iron powders made from fine oxide particles had low apparent density and irregular shapes compared with those from ore and mill-scale.<BR>2) Compressibility was not so good, but compactibility was excellent. Mechanical strength of green compacts was very high, and the rattler value was very small.<BR>3) The mechanical strength of these sintered compacts was high in comparison with commercial reduced iron powders and the elongation was especially high at high sintered density.<BR>4) The lower is the hydrogen loss of iron powders, the higher both green and sintered densities were obtained then dimensional change (shrinkage) was small and the elongation was much improved.<BR>It was found that these iron powders produced by reduction of iron oxides, which were made as a byproduct from waste pickling liquor, had many interesting properties, especially in compactibility and mechanical strength of both green and sintered compacts.
- 社団法人 粉体粉末冶金協会の論文
著者
関連論文
- 201 鋼粉の真空中誘導加熱脱酸技術について(H 形鋼・粉末・溶接・討論会, 加工, 日本鉄鋼協会 第 95 回(春季)講演大会)
- 54 塊状帯での鉱石, コークスの充填状態 : 千葉 1 高炉解体調査 7(製銑基礎・石炭・フェロアロイ・コークス, 製銑, 日本鉄鋼協会 第 97 回(春季)講演大会)
- 39 液化用石炭種の選定方法と液化炭の特性(焼結操業 (I)・コークス, 製銑, 日本鉄鋼協会 第 105 回(春季)講演大会)
- 乾式および湿式消火コ-クスの冷間強度差の解明
- 21 再生炭の製造とコークス化性評価(コークス, 製銑, 日本鉄鋼協会第 104 回(秋季)講演大会)
- 75 ドラム試験器内のコークスの破壊挙動の解析(焼結基礎・高温性状・スラグ顕熱回収・コークス, 製銑, 日本鉄鋼協会第 103 回(秋季)講演大会)
- 147 乾式および湿式消火コークスの冷間強度差の解明(コークス製造・コークス炉内性状, 製銑, 日本鉄鋼協会 第 102 回(秋季)講演大会)
- 水アトマイズ未還元鋼粉圧粉体の焼結過程における電気抵抗変化
- KIP4100鋼粉 川崎製鉄 (わが社の新材料)
- パック鍛造法と鍛造材の性質 (粉末成形)
- 塩酸酸洗廃液の噴霧焙焼により副生する酸化第二鉄
- 固体還元剤によるミルスケ-ル充填層の還元〔鉄粉製造における還元機構に関する研究-1-〕
- 水噴霧Fe-Si合金粉の規則-不規則変態とその焼結現象
- 303 廃酸処理で副生する酸化第二鉄(廃酸処理・情報処理・分析, 性質, 日本鉄鋼協会第 90 回(秋季)講演大会)
- 新しい粉末加工法--パックト鍜造法による大形素材の特性と応用
- 新しい粉末加工法としてのパックト鍛造
- 89 転炉スラグの安定性の予測(コークス・スラグ・スラグ研究部会報告, 製銑, 日本鉄鋼協会第 104 回(秋季)講演大会)
- 96 製鉄スラグの被粉砕特性(製銑基礎 (II) ペレット・高炉スラグ, 製銑, 日本鉄鋼協会 第 102 回(秋季)講演大会)
- 粉末成形・粉末鍛造 (〔塑性と加工〕年間展望特集号)
- 水アトマイズ未還元鋼粉圧粉体の焼結過程における電気抵抗変化
- 等方性ストロンチウムフェライト磁石におよぼす塩素の影響
- 廃酸処理で副生する酸化鉄からの鉄粉
- 高密度用還元鉄粉の製造技術の開発研究
- 鉄粉圧粉体の焼結過程における電気抵抗変化