Ti(C,N)-30Mo2C-13Ni-合金の諸特性に及ぼすN/(C+N)比の影響
スポンサーリンク
概要
- 論文の詳細を見る
The microstructural features and mechanical, thermal and cutting properties of Ti(C, N)-30Mo<SUB>2</SUB>C-13Ni alloys were investigated in relation to the N/(C+N) ratio.<BR>The results obtained are as follows:<BR>(1) The growth rate of (Ti, Mo) (C, N) phase formed around Ti(C, N) core particles decreased with an increase of N/(C+N) ratio.<BR>(2) Hardness of sintered alloy decreased, while transverse rupture strength remained unchanged with an increase of N/(C+N) ratio. 0.002% offset yield stress in compressive test increased, however, plastic strain and Young's modulus decreased with an increase of N/(C+N) ratio.<BR>(3) Thermal expansion coefficient and thermal conductivity increased with the rise of N/(C+N) ratio. Thermal shock resistance calculated from the equation of R=(ρσB/δE) increased with the rise of N/(C+N) ratio of the alloy.<BR>(4) Flank wear resistance of Ti(C, N)-30Mo<SUB>2</SUB>C-13Ni alloy in continuous cutting steel decreased, whereas the crater wear resistance increased with the rise of N/(C+N) ratio of the alloy. Resistance against mechanical and thermal shock of the above alloy in intermittent cutting of steel increased with the rise of N/(C+N) ratio. The alloy with N/(C+N) ratio of 0.297 was found to be the most excellent alloy in wear and shock resistance in cutting of steel.
- 社団法人 粉体粉末冶金協会の論文
著者
関連論文
- TiC0.7N0.3-15Ni-8Mo合金の機械的および切削特性に及ぼすAlN添加の影響
- WC-(6-20)%Co合金の高温曲げ破壊特性に及ぼす歪み速度の影響
- WC-10%Co合金の高温曲げ破壊特性に及ぼす内在欠陥の影響
- HIPによって成形したRené95の組織と機械的特性
- Ti(C,N)-30Mo2C-13Ni-合金の諸特性に及ぼすN/(C+N)比の影響
- TiC0.7-N0.3-15Ni-8Mo合金の機械的および切削特性に及ぼす添加炭素量の影響
- TiC-15Ni-8Moサ-メットへのアルミニウム添加の微細構造,機械的性質に及ぼす影響