Simulation Analysis of Coal Packed Bed Type Smelting Reduction Process.

スポンサーリンク

概要

• 論文の詳細を見る

• The simulation analysis of material and heat flow in coal packed bed type smelting reduction process, such as COREX process, was conducted by use of the computer model developed based on the heat and material balance. The simulation was conducted by focusing on the amount of volatile material in coal used in the process and the operation condition of the fluidized bed melter gasifier where the reducing gas used in the reduction shaft is generated. The coal consumption decreases with decrease amount of the volatile material in coal. By increasing the oxidation degree of off-gas from the fluidized bed melter gasifier, the coal consumption decreases but the increasing amount is limited by the requirements of reduction shaft. The simulation results show that it is important for efficient process to control the volume and temperature of off-gas from the fluidized melter gasifier to be matched with the requirement of reduction shaft, which is necessary for reducing the amount of gas scrubbed and cooled as much as possible. It can be accomplished by using the low volatile coal and by increasing the oxidation degree of off-gas from the fluidized melter gasifier within the allowable range.

• The Iron and Steel Institute of Japanの論文

著者

• Tokuda Masanori

  Institute For Advanced Materials Processing

• Yoon Jong-Kyu

  Department of Metallurgical Engineering, College of Engineering, Seoul National University

• Shin Myoung-Kyun

  Department of Metallurgical Engineering, College of Engineering, Seoul National University

関連論文

• Numerical Analysis on Cold Crucible Using 3D H-φ Method and Finite Volume Method with Non-staggered BFC Grid System
• Integrated System of Thermodynamic Database and Software and its Application : Combination of MALT with ChemSage(High-T_c Superconducting Materials Research)
• DECOMPOSITION OF RARE EARTH CONTAINING ORES BY ALKALINE HYDROTHERMAL PROCESS
• A Database for Thermochemical Properties of Metallic Solution Systems(High-T_c Superconducting Materials Research)
• Simulation Analysis of Coal Packed Bed Type Smelting Reduction Process.
• Flow Characteristics by Induction and Gas Stirring in ASEA-SKF Ladle.
• The cold model study on the decarburization rate in oxygen steelmaking processes by CO2-KOH system.

スポンサーリンク