Mathematical Modeling of Inclusion Transport and Removal in Continuous Casting Tundishes.
スポンサーリンク
概要
- 論文の詳細を見る
Three-dimensional mahematical models are currently being used successfully to model liquid steel flow and turbulence behavior in continuous casting tundishes. Traditionally, this information is used to calculate the residence time distribution (RTD) of liquid metal in the given turdish configuration. The RTD curve provides the effectiveness of a tundish to produce cleaner steel in an indirect and qualitative manner. Recently, some computational models have been developed to predict inclusion trajectories and their rate of flotation in a semi-quantitative manner. In the present work, a model that addresses the inclusion transport and removal phenomena from the molten metal has been developed. The model examines three modes (flotation to the surface, coalescence of particles to form larger inclusions, and sticking to the solid surfaces) of inclusion density reduction from molten steel in the tundish. The effect of various flow control devices, such as dams, weirs and baffles with holes on each of these inclusion reduction modes was investigated and their inclusion removal efficiencies were compoared. The role of different flow control devices in producing cleaner steel has been discussed.
- The Iron and Steel Institute of Japanの論文
著者
-
Sahai Yogeshwar
Department Of Materials Science And Engineeering The Ohio State University
-
Sinha Asish
U.S. Steel Technical Center
関連論文
- Criteria for Water Modeling of Melt Flow and Inclusion Removal in Continuous Casting Tundishes
- (1) Simulation of Melt Flow and Inclusion Flotation in Continuous Casting Tundishes (Miscellany)
- Melt Flow Characterization in Continuous Casting Tundishes
- Modeling of Fluid Flow and Heat Transfer in Twin-Roll Casting of Aluminum Alloys
- Viscosity and Density of Molten Salts Based on Equimolar NaCl-KCl
- A Criterion for Water Modeling of Non-isothermal Melt Flows in Continuous Casting Tundishes
- Mathematical Modeling of Thermally Induced Stresses in Two-roll Melt Drag Thin Strip Casting of Steel
- Interfacial Behavior and Coalescence of Aluminum Drops in Molten Salts
- Mathematical Modeling of Fluid Flow, Heat Transfer, and Solidification in Two-roll Melt Drag Thin Strip Casting of Steel
- Surface Tension and Density of Molten Salts Based on Equimolar NaCl-KCl with Addition of Fluorides
- Coalescence Behavior of Aluminum Alloy Drops in Molten Salts
- Wetting Behavior in Aluminum-Alumina-Salt Systems
- Interaction and Interfacial Tension between Aluminum Alloys and Molten Salts
- Modeling of Thermo-Mechanical Stresses in Twin-Roll Casting of Aluminum Alloys
- Chemical Interactions of Dross with Water and Water Vapor in Aluminum Scrap Remelting
- Interfacial Tension between Aluminum Alloy and Molten Salt Flux
- Mathematical Modeling of Inclusion Transport and Removal in Continuous Casting Tundishes.
- The Effect of Tracer Density on Melt Flow Characterization in Continuous Casting Tundishes. A Modeling Study.