Study on Corrosion Properties of Welded Ferritic-Martensitic Steels in Liquid Lead-Bismuth at 600°C
スポンサーリンク
概要
- 論文の詳細を見る
Ferritic-martensitic steel with several welding methods in LBE were observed. The material was welded HCM12A. The specification of TIG, YAG laser and electron beam welding were 40A/12V of electrical conductance, 278W/14.3J of heat input and 5.0 mA of beam electric current, respectively. The stagnant corrosion test was conducted in liquid LBE at 600°C for 500 h. Oxygen concentration was controlled to be ∼4.7x10-6wt% by using Ar-H2-H2O mixed gas. After corrosion test, cross sections of the specimens were analyzed by using optical microscope and SEM/EDX. In order to know the hardness profiles of fusion zone and base metal were observed by using Vickers hardness tool. The results show coarse grain structure around fusion zone and typical ferritic-martensitic grain structure in base metal. It was found that Cr-rich spinel oxide layer and diffusion zone formed on the surface. However, it appears much thicker in the fusion zone, about 18-30µm, with respect to the base metal (10-15µm). The hardness number increase in fusion zone.
著者
-
TAKAHASHI Minoru
Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology
-
MUSTARI Asril
Dept. of Nuclear Engineering, Tokyo Institute of Technology
-
Takahashi Minoru
Research Laboratory For Nuclear Reactors Tokyo Institute Of Technology
関連論文
- The Onset of Cavitation and the Acoustic Noise Characteristics of Sodium Flow in a Venturi
- Study on Corrosion Properties of Welded Ferritic-Martensitic Steels in Liquid Lead-Bismuth at 600°C
- Cavitation Damage in Flowing Liquid Sodium Using Venturi Test Section
- ICONE11-36375 STUDY ON CORROSION PHENOMENA OF STEELS IN PB-BI FLOW
- Density Wave Instability of Sodium Boiling Two-phase Flow in a Vertical Annulus at Low Pressure
- Corrosion of Steels in Lead-Bismuth Flow
- Metallurgical Analysis of a Tube Ruptured in the Lead Bismuth Corrosion Test Facility
- Broadband active sound control system for air-conditioning duct noise
- Feasibility and Performance of Magnetic Theromosyphon with Magnetic Fluid in Non-Gravity Field
- Study on High Speed Lithium Jet For Neutron Source of Boron Neutron Capture Therapy (BNCT)
- Experimental Study on Thermal Interaction of Ethanol Jets in High Temperature Fluorinert
- Density Wave Instability of Sodium Boiling Two-phase Flow in a Vertical Annulus at Low Pressure
- Numerical Analysis of Lead-Bismuth-Water Direct Contact Boiling Heat Transfer
- Burn-off and Production of CO and CO2 in the Oxidation of Nuclear Reactor-Grade Graphites in a Flow System.