Analysis of Separation Conditions for Shrink Fitting System Used for Ceramics Conveying Rollers
スポンサーリンク
概要
- 論文の詳細を見る
Steel conveying rollers used in hot rolling mills must be exchanged frequently at great cost because hot conveyed strips induce wear and deterioration on the surface of roller in short periods. In this study, new roller structure is considered which has a ceramics sleeve connected with two steel shafts at both ends by shrink fitting. Here, although the ceramics sleeve can be used for many years, the steel shaft sometimes has to be exchanged for reconstruction under corrosive action induced by water cooling system. Since the thermal expansion coefficient of steel is about five times larger than that of ceramics, it is necessary to investigate how to separate the shrink fitting system by heating outside of sleeve and cooling inside of the shaft. In this study, the finite element method is applied to analyze the separation mechanism by varying the geometrical and thermal conditions for the structure. Finally the most appropriate dimension and thermal conditions have been found, which may be useful for designing of new rollers.
著者
-
NODA Nao-Aki
Department of Mechanical Engineering, Kyushu Institute of Technology
-
LI Wenbin
Department of Mechanical Engineering, Kyushu Institute of Technology
-
TAKASE Yasushi
Department of Mechanical Engineering, Kyushu Institute of Technology
-
SAKAI Hiromasa
Department of Mechanical and Control Engineering, Kyushu Institute of Technology
関連論文
- Thermal Stress and Heat Transfer Coefficient for Ceramics Stalk Having Protuberance Dipping into Molten Metal
- Analysis of Separation Conditions for Shrink Fitting System Used for Ceramics Conveying Rollers
- A42 A HYBRID ELEMENT METHOD FOR ANTIPLANE INTERFACE CRACK PROBLEMS BETWEEN BONDED PIEZOELECTRIC LAYERS
- Interaction Effect between Ellipsoidal Inclusions in an Infinite Body under Asymmetric Uniaxial Tension
- Singular Integral Equation Method in the Analysis of Interaction between Rectangular Inclusions
- Effective Young's Modulus of a Composite Including Two Groups of Periodically Arranged Inclusions
- Thermal Stress During Separation for Ceramics Sleeve and Shaft Connected by Shrink Fitting
- Thermal Stress Analysis for Ceramics Stalk in the Low Pressure Die Casting Machine