Control of Impingement Heat Transfer Using Mist
スポンサーリンク
概要
- 論文の詳細を見る
Impingement heat transfer from a circular orifice jet by using latent heat of water mists was studied experimentally. The amounts of mists of about Zauter's mean diameter 14 µm were from 60 to 200 g/h within a range where liquid films were not formed on the target plate and mists were added near the orifice edge. Experiments covered Reynolds numbers from 12,500 to 50,000 and a heat flux is 1,400 W/m<SUP>2</SUP>. The experimental results indicate that adding mists had little influence on free jet mean velocity profiles and target plate pressure coefficients. On the other hand, mists had a strong influence on temperature and humidity profiles of a free jet and they also influenced Nusselt number distributions on the target plate. Increases of mists and Reynolds number caused increases in Nusselt number on the developed region. In addition, we investigated influence of the way mists were added and these results showed that Nusselt number was influenced not only by the amounts of mists but also by the adding method. Local Nusselt number profiles with mists were closely related to temperature distributions of the free jet at the location corresponding to the target plate.
- 一般社団法人日本機械学会・社団法人日本伝熱学会の論文
一般社団法人日本機械学会・社団法人日本伝熱学会 | 論文
- Magnifying and Tracking Observation of Micro PET Particles Passing through a Plane Premixed Flame Front
- Microscopic Approaches to Decomposition and Burning Processes of a Micro Plastic Resin Particle under Abrupt Heating
- Time-Resolved and Micro-Scale Measurement of Thermal Property for Intermolecular Dynamics Using an Infrared Laser
- Robust Thermal Design for Power Device Package Using Response Surface Method and Monte Carlo Simulation
- Evaluation of Debris Transport on Containment Floor during Pool Filling-up to Continuous Flow Phase Following a LOCA