Two-Phase Swirling Flow in a Gas-Liquid Separator

概要

論文の詳細を見る
Air-water swirling flows in a one-fifth model of a steam separator in a boiling water nuclear reactor are measured to obtain a database for modeling and verification of numerical methods for predicting swirling flows in the separator. Flow patterns, liquid film thicknesses, separated flow rates and the ratio Ws* of the separated flow to the total liquid flow are measured using a high-speed camera, a laser focus displacement meter and flowmeters. Main conclusions obtained are as follows: (1) liquid transfer from droplets to liquid film is caused not only by droplet deposition but also by the collection of droplets on the vanes of the swirler, (2) Ws* increases with the gas volume flux JG and does not depend on the liquid volume flux JL so much because a large centrifugal force caused by the swirler makes most of droplets in the gas core deposit on the liquid film before the separation and (3) a local peak appears in the axial distribution of film thickness, the position of which corresponds to the location where the droplet deposition caused by the centrifugal force has completed.
一般社団法人日本機械学会の論文