OPTIMIZATION OF A DC-SQUID MAGNETOMETER TO MINIMIZE THE FIELD RESOLUTION
スポンサーリンク
概要
- 論文の詳細を見る
The circuit parameters of a dc SQUID magnetometer have been optimized by computer simulations. Our principle of optimization is to minimize the field resolution. We have optimized the circuit parameters of a dc SQUID magnetometer, such as a .Ketchen type, Drung type, directly-coupled type, etc. The only noise source was assumed to be thermal noise from the shunt resistors. For a Ketchen type SQUID, our results show that the inductance of the input coil and the washer coil should be larger than that reported previously. It is also the case for a Drung type SQUID that the inducatance of the SQUID washer coil should be slightly increased. By this design method, the optimum field resolution of a Ketchen type SQUID magnetometer is improved by a factor of 2/3. Furthermore, we compared the resolution of 3 types of dc SQUIDs and concluded that the optimum type of SQUID depends on the value of the critical current and the radius of the pick-up coil. Finally, we have proposed a new design method that can optimize the field resolution of dc SQUIDs under constraints on the critical current and the spatial resolution.
- IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INCの論文
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC | 論文
- Preparation and Characterization of Nanofiber Nonwoven Textile for Electromagnetic Wave Shielding
- Statistical characteristics of atmospheric phase fluctuations observed by a VLBI system using a beacon wave from a geostationary satellite
- Cross-Talk Suppression in High-Density Printed Circuit Boards Using Magnetic Composite Filled in Spacing Between Signal Lines
- Development of an Electromagnetic Wave Shielding Textile by Electroless Ni-Based Alloy Plating
- Y-BA-CU-O THIN-FILMS BY EVAPORATING THE 3 ELEMENTS USING RESISTIVE HEATING