ボールねじ熱膨張のリアルタイム補正による位置決め精度の向上(第2報) : 室温変動下の位置決め誤差を"ゼロ"に補正

概要

論文の詳細を見る
This paper deals with the improvement for Zero positioning error of machine tool element under room temperature change. During operation the temperature at fifteen positions of the hollow ball-screw is measured and input into the personal computer by the optical telemeter system. Based upon the temperature distribution of ball-screw, the present position of ball-screw nut obtained from CNC controller and the information of initial positioning error, the compensating quantity for Zero positioning error is calculated. The compensating quantity is fed from the PC to CNC controller, and the origin shift of machine coordinate is immediately executed. These measurement and control are repeatedly executed during operation, and the real-time compensation is realized. Only once the measurement of initial positioning error is needed. It is clarified that the positioning error of -8.4〜+1.5μm is realized under room temperature change of 16.5〜26.5℃ during 23.5hr operation.
社団法人精密工学会の論文
2008-10-05