Convection in Weld Pool and Its Effect on Penetration Shape in Stationary Arc Welds(Physics, Process, Instrument & Measurement)

スポンサーリンク

概要

• 論文の詳細を見る

• The importance of convective heat transfer in the weld pool has been widely recognized in relation to the penetration shapes of base metal. The main causes that associate streaming in molten pool are the electro magnetic force, buoyancy force, surface tension and aero dynamic drag force. But, the mechanism of heat transfer has not yet been clarified well. Therefore, in this work, they have paid special attension on the importance of convectional heat transfer in the weld pool and the anode size or heat source size under the same heat input, or same current value. A finite difference methode was employed to solve above-mentioned mechanism. The results obtained were as follows. 1) When arc length is short, the velocity field induced by outward surface shear stress consists of two flow loops of opposite directions in the molten pool, which lead to comparatively deep weld shape. 2) In case of short arc length and positive temperature coefficient of surface tension, surface tension is predominant. Accordingly, penetration shape is deep. 3) In case of long are length, aero dynamic drag force is predominant, which leads to a 'shallow' center and 'deep' peripheral penetration.

• 大阪大学の論文

著者

• Yokoya Shinichiro

  Nippon Institute Of Technology

• Yokoya S

  Nippon Inst. Of Technol. Saitama Jpn

• MATSUNAWA Akira

  Welding Research Institute, Osaka University

• ASAKO Yutaka

  Tokyo Metroporitan University

• Matsunawa A

  Osaka Univ. Osaka Jpn

• Matsunawa Akira

  Welding Research Institute Osaka University

• Asako Yutaka

  Tokyo Metropolitan University

関連論文

• Convection in Weld Pool and Its Effect on Penetration Shape in Stationary Arc Welds(Physics, Process, Instrument & Measurement)
• Surface Tension Driven Flow in Semicylindrical Basin
• Die Untersuchung der Elektromagnetischen Konvektion
• Heat and Mass Transfer and Their Effect on Penetration Shape in Stationary TIG Arc Weld Pool
• Heat Transfer and Pressure Drop Characteristics in a Converging- Diverging Duct : Heat Transfer and Pressure Responses to Rounding of Peaks : Fluids Engineering, Heat Transfer, Combustion, Power, Thermophysical Properties,
• 2-2 Formation of Ceramics Coating by Laser Processes(Session 2 : Surface Modification,SIMAP'88 Proceedings of International Symposium on Strategy of Innovation in Materials Processing-New Challenge for the 21st Century-)
• Beam-Plume Interaction in Laser Materials Processing(Physics, Process, Instrument & Measurement)

スポンサーリンク