表面にらせん溝を有する回転円板の摩擦抵抗低減(流体工学,流体機械)

概要

論文の詳細を見る
The purpose of this study is to obtain the new type of the drag reduction for the frictional moment of an enclosed rotating disk by using the fine spiral grooves on the disk surface. The experiments were carried out the measurement for the frictional moment of an enclosed rotating disk with fine spiral grooves, of which there were 120〜160 in the number and 0.1〜0.2mm in depth, respectively. The Reynolds number range is 4×10^4≤Re≤6×10^5. Test fluids are tap water and aqueous solutions of glycerin. It was seen that the drag reduction occurs in the turbulent flow range at the non-dimensional axial clearance (s/a)=0.011, 0.22 and 0.33, the maximum drag reduction ratio is approximately 15%. The drag reduction depends on the number, the angle and the depth of the grooves. The fine spiral groove has the effect which suppresses the development of the fluctuation of transition region, and which delays the generation of the local turbulence in the transition range.
社団法人日本機械学会の論文
2005-12-25