ナトリウムプールの着火遅れと着火限界 : 理論と実験との比較(熱工学,内燃機関,動力など)
スポンサーリンク
概要
- 論文の詳細を見る
Relevant to sodium pool burning, ignition delay and ignitability are exmined in order to obtain appropriate parameters that can fairly correlate dominant system parameters influencing the ignition. For this aim, a theoretical work has first been conducted, being considered that the surface reaction can mainly exert influences. It is found that both the ignition delay time and the limit of ignitability are closely related to the pool size and oxygen concentration, as well as the initial sodium temperature. Specifically, for the ignition delay, a comprehensive parameter defined as the ignition delay time multiplied by oxygen concentration and divided by pool depth has been identified. For the limit of ignitability, it is found another comprehensive parameter defined as a product of oxgen concentration and representative length for the heat transfer. In order to evaluate appropriateness of the theory, experimental comparisons have been conducted, by use of experimental data in the literature. It is demonstrated that there exists a fair degree of agreement between the experimental and analytical results, as far as the trend and/or approximate magnitude are concerned, in spite of differences in experimental conditions and several assumptions done in the present analysis. Because of simple forms of the comprehensive parameters, they are expected to be useful in evaluating ignitability of sodium prior to pool burning in an oxidizing atmosphere. Furthemore, it is found that the increase in volume-to-surface ratio of the sodium pool prolongs the ignition delay, and that the decrease in pool diameter suppresses the ignition, both of which can be attributed to the reduced contribution of the surface reaction that can supply heat in the induction period.
- 社団法人日本機械学会の論文
- 2005-08-25
著者
関連論文
- ダイヤモンド薄膜の燃焼合成における基板温度の影響 : 成長速度と結晶状態について
- 燃焼合成における燃焼波伝播および自己着火に関する機構解明ツールの検証 : Ti-Al 系への適用
- よどみ流れ中における高密度炭素ならびに炭素/炭素複合材の燃焼(熱工学,内燃機関,動力など)
- 薄膜積層型燃焼合成の燃焼速度ならびに可燃範囲に及ぼす薄膜厚さの影響(熱工学,内燃機関,動力など)
- 薄膜積層型燃焼合成の燃焼速度ならびに可燃範囲に及ぼす薄膜厚さの影響
- Mo-Si系燃焼合成の燃焼速度ならびに可燃範囲に及ぼす粒径の影響(熱工学,内燃機関,動力など)
- Ti-Al系燃焼合成の燃焼速度ならびに可燃範囲に及ぼす主要パラメータの影響(熱工学,内燃機関,動力など)
- ナトリウムプールの着火遅れと着火限界 : 理論と実験との比較(熱工学,内燃機関,動力など)
- ナトリウム落下液滴の燃焼挙動 : 燃焼速度定数と抵抗係数(熱工学,内燃機関,動力など)
- Ti-Al系燃焼合成における自己着火温度に及ぼす主要パラメタの影響(熱工学,内燃機関,動力など)
- Ti-Al系燃焼合成における自己着火温度に及ぼす主要パラメタの影響
- A-5 環状燃焼器試験設備の拡充整備(燃焼・燃焼器I,一般講演)
- B-8 高温高圧燃焼試験設備の拡充整備(燃焼・燃焼器I,一般講演)
- 3. 特別講演(2011年国際ガスタービン会議大阪大会,創立40周年記念)
- 2011年国際ガスタービン会議大阪大会
- ナトリウムの自己着火に関する基礎的研究
- 炭素やホウ素といった高エネルギ密度燃料粒子の燃焼完結に不可欠な条件に関して
- 653 MgB_2の燃焼合成におけるMg粒径の影響 : X線回折による生成物の定量分析(OS6-1 燃焼技術の高度化と現象解明(1),OS6 燃焼技術の高度化と現象解明)