Land/Groove Signal and Differential Push-Pull Signal Detection for Optical Disks by an Improved 3-Beam Method
スポンサーリンク
概要
- 論文の詳細を見る
In land/groove recording, it is necessary to detect both a land/groove signal and a differential push-pull signal for stabilization of the tracking servo. The former discriminates between land and groove during track pull-in operation, while the latter compensates for offset of the tracking error signal due to shift of the objective lens. This paper proposes an improved 3-beam method for detecting both signals with the same beam configuration. A 4-segment diffraction grating is employed, in which the grating patterns for two diagonal regions are π/2 out of phase. A land/groove signal is obtained from sub-beam signals, while a differential push-pull signal is obtained from the difference between the main beam and sub-beam signals. Features of this method are the applicability to disks with different track Pitches and the robustness against disk eccentricity. A land/groove signal was observed, and the compensation of the tracking error signal offset with shift of the objective lens was confirmed experimentally. These results have demonstrated the validity of this method.
- 社団法人応用物理学会の論文
- 1999-03-30
著者
-
Komatsu Y
Functional Devices Research Laboratories Nec Corporation
-
KATAYAMA Ryuichi
Optical Recording Technology Development Center, NEC Corporation
-
Meguro Shunichi
Functional Devices Research Laboratories Nec Corporation
-
KOMATSU Yuichi
Optical Recording Technology Development Center, NEC Corporation
-
Katayama R
Functional Devices Research Laboratories Nec Corporation
-
Katayama Ryuichi
Optical Recording Technology Development Center Nec Corporation
-
MEGURO Shunichi
Optical Recording Technology Development Center, NEC Corporation
-
Meguro Shunichi
Optical Recording Technology Development Center Nec Corporation
-
Komatsu Yuichi
Optical Recording Technology Development Center Nec Corporation
関連論文
- Multi-Beam Optical Disk Drive for High Data Transfer Rate Systems : Drive Technology
- Multi-Beam Optical Disk Drive for High Data Transfer Rate Systems
- Monolithic Eight-Channel High-Power Low-Astigmatism AlGaAs Laser Diode Array
- Heteroepitaxial Growth of InGaP on Si with InGaP/GaP Step-graded Buffer Layers
- Optimization of Silicon-Based 2-Terminal Tandem Solar Cells with GaAs_P_x and InGa_P_x as Top Cell Material
- High-Density Land/Groove Recording for Digital Video File System
- 0.13μm Metal-Oxide-Nitride-Oxide-Semiconductor Single Transistor Memory Cell with Separated Source Line
- Analysis of Carrier Traps in Si_3N_4N_4 in Oxide/Nitride/Oxide for Metal/Oxide/Nitride/Oxide/Silicon Nonvolatile Memory
- Development of Sub-Quarter-μm MONOS (metal/oxide/nitride/oxide/semiconductor)Type Memory Transistor
- Development of Sub-Quarter-μm MONOS Type Memory Transistor
- Compact Magneto-Optical Head Module Integrated with Chip Elements using Double Holograms
- Thin Optical Head with Flip-Chip Bonded Module for Compact Disc Read Only Memory Drives
- Optical Module Using Double-Sided Polarizaing Diffractive Optical Element for Digital Versatile Disc Drives
- Radial and Tangential Tilt Detection for Rewritable Optical Disks
- Dual Wavelength Optical Head for 0.6 mm and 1.2 mm Substrate Thicknesses
- Measurement of Velocity of Surface Acoustic Waves on Proton-Exchanged Lithium Tantalate Using Comb Filters
- Land/Groove Signal and Differential Push-Pull Signal Detection for Optical Disks by an Improved 3-Beam Method
- Radial and Tangential Tilt Detection for Rewritable Optical Disks
- Dual Wavelength Optical Head for 0.6 mm and 1.2 mm Substrate Thicknesses