Pulse-Field-Assisted Wafer Bonding for Silicon on Insulator
スポンサーリンク
概要
- 論文の詳細を見る
We have developed a pulse-field-assisted bonding tcchnique to give void-free, low-temperature wafer bonding for SOI (silicon on insulator). We bonded a pair of oxided wafers by applying pulses of a few hundred volts across the wafers at 800℃ in a 0.1 Pa nitrogen ambient. To reduce the volatile materials on the surfaces of wafers, which cause voids at low temperature, we heated the wafers at reduced pressure. The impulsive electrostatic force deforms the insulating oxide and allows bonding despite surface roughness and wafer warpage. Our pulse-field-assisted bonding reduces both the bonding temperature and time. We obtained a bond strength of over 1700 kgf/cm^2 after thermal treatment at 800℃ for 1 min. This paper also discusses surface roughness, voids, and bond strength.
- 社団法人応用物理学会の論文
- 1992-06-15
著者
関連論文
- Influence of Organic Contamination on Silicon Dioxide Integrity
- Application of Reversed Silicon Wafer Direct Bonding to Thin-Film SOI Power ICs
- Application of Reversed Silicon Wafer Direct Bonding to Thin-Film SOI Power Ics
- Ti Salicide Process for Subquarter-Micron CMOS Devices (Special Issue on Quarter Micron Si Device and Process Technologies)
- Advanced SOI Devices Using CMP and Wafer Bonding
- Time-Dependent Airborne Organic Contaimination on Silicon Wafer Surface Stored in a Plastic Box
- Reconditioning-Free Polishing for Interlayer-Dielectric Planarization
- High-Speed SOI Bipolar Transistors Using Bonding and Thinning Techniques
- A New SOI-Lateral Bipolar Transistor for High-Speed Operation
- Simultaneous Temperature Measurement of Wafers in Chemical Mechanical Polishing of Silicon Dioxide Layer
- A pH-Controlled Chemical Mechanical Polishing Method for Thin Bonded Silicon-on-Insulator Wafers
- Bond Strength of Bonded SOI Wafers
- Pulse-Field-Assisted Wafer Bonding for Silicon on Insulator
- Mn2O3 Slurry Reuse by Circulation Achieving High Constant Removal Rate
- Mn2O3 Slurry Achieving Reduction of Slurry Waste
- Si Wafer Bonding with Ta Silicide Formation
- Time-Dependent Airborne Organic Contamination on Silicon Wafer Surface Stored in a Plastic Box