Some Properties of Silicon Nitride Films Produced by Radio Frequency Glow Discharge Reaction of Silane and Nitrogen
スポンサーリンク
概要
- 論文の詳細を見る
Silicon nitride films are deposited on silicon wafer at low temperature by radio frequency glow discharge reaction of silane and nitrogen. The main peak position of infrared transmission spectra, the growth rate and the etch rate of the nitride films change respectively from 870 to 820 cm^<-1>, from 0.8 to 6.5Å/sec and from 150 to 5Å/sec in 15% HF etchant with changing silane concentration from 0.1 to 2,5 mol %. The etch rate is larger than that of the thermally grown silicon nitride. The dielectric constant of nitride films changes from 8 to 5 with changing substrate temperature from 500 to 25℃. The nitride film deposited at as high temperature as 500℃ shows a large hysteresis of C-V curve. The silicon nitride film deposited at the substrate temperature of 300℃ and at the silane concentration of 0.5 mol % is stable against B-T treatment as well as thermally grown silicon nitride films. The value of flat-band surface charge ranges from 7 to 14×10"/cm^2, the value is relatively small in comparison with that ofthermally grown nitride.
- 社団法人応用物理学会の論文
- 1969-07-05
著者
関連論文
- Effects of Substrate Surface Condition on a-Si Photovoltaic Characteristics : III-4: AMORPHOUS SOLAR CELLS (3) : Device Physics
- Laser Patterning Method for Integrated Type a-Si Solar Cell Submodules
- Modulation Type Pyroelectric IR Detector
- Preparation and Properties of a-SiGe:H:F Films by a Glow Discharge Decomposition
- Raman Study on the Silicon Network of Hydrogenated Amorphous Silicon Films Deposited by a Glow Discharge
- The Preparation and Properties of Silicon Nitride Produced by a Radio Frequency Glow Discharge Reaction of Silane and Nitrogen : Preparation and Properties of Silicon Nitride
- Preparation and Properties of a-Si Films Deposited at a High Deposition Rate under a Magnetic Field
- Possible Errors due to Deviation from the Cosine Response in the Reference Cell Calibration under Global Irradiance
- Preparation and Properties of a-SiGe:H Films Fabricated with a Super Chamber (Separated Ultra-High Vacuum Reaction Chamber)
- Preparation and Properties of High-Quality a-Si Films with a Super Chamber : Separated Ultra-High Vacuum Reaction Chamber
- A New Analytical Method of Amorphous Silicon Solar Cells
- Light-Induced Effect of a-Si Films Fabricated Using the Super Chamber
- High-Rate Deposition of a-Si:H Film with a Separated Plasma Triode Method
- Preparation and Photovoltaic Characteristics of a-Si Solar Cells Produced by a Consecutive, Separated Reaction Chamber Method : III-2: AMORPHOUS SOLAR CELLS (1) : Proparation Process
- Energy Conversion Process of p-i-n Amorphous Si Solar Cells
- Properties and Photovoltaic Characteristics of a-SiC : H Film : III-3: AMORPHOUS SOLAR CELLS (2) : Characterization
- Analysis of the Photovoltaic Characteristics of p-i-n a-Si Solar Cells : III-3: AMORPHOUS SOLAR CELLS (2) : Characterization
- A New Integrated Type Amorphous Si Solar Cell : III-4: AMORPHOUS SOLAR CELLS : Device Performances
- Effects of Surface Conditions of Substrates upon Performance of a-Si Photovoltaic Cells : III-1: AMORPHOUS SOLAR CELLS : Film Deposition
- Properties of Amorphous Si:F:H Film and Its Photovoltaic Characteristics : III-1: AMORPHOUS SOLAR CELLS : Film Deposition
- A New-Structure IR Gas Sensor
- Modulation Type Pyroelectric Infrared Sensor Using LiTaO_3 Single Crystal : P: Pyroelectrics
- A 2 kW Photovoltaic Power Generating System Using a-Si Solar Cells : II-3: SYSTEM AND ARRAY
- The Pyroelectric Sensor : SYMPOSIUM ON APPLICATION OF FERROELECTRIC MATERIALS
- A New-Structure LiTaO_3 Pyroelectric Infrared Detector : FERROELECTRIC MATERIALS
- Amorphous Si Photovoltaic Cells and Cell Module : Integrated Cell Module : II-3: AMORPHOUS SEMICONDUCTOR PHOTOVOLTAIC DEVICES
- Some Properties of Silicon Nitride Films Produced by Radio Frequency Glow Discharge Reaction of Silane and Nitrogen
- Preparation and Properties of Amorphous Silicon Produced by a Consecutive, Separated Reaction Chamber Method