共鳴形消音器の特性計算法
スポンサーリンク
概要
- 論文の詳細を見る
In the proceeding paper(this Journal 25(3)1969, p. 122), it was shown that the noise reducing effect of a muffler is deduced by means of the four-terminal constants of the equivalent electrical network of the whole muffler system, and for expansion chamber type mufflers, approximate equations are very simple and the noise reducing curve is easily obtained by a graphical method. In this paper, a similar method is applied to the resonator type mufflers, and equations are shown in Eq. (11), (12), (13) and (16), and a graphical method in Table 1 and Fig. 8. Practically, as shown in Fig. 7(a), the resonator type muffler is efficient only in the region near the first resonant frequency, and furthermore the loss at the mouth of resonator is not negligible. But the calculation of the loss is very difficult, so the loss is estimated as convenient to the graphical process as shown id Fig. 9. By this estimation, the noise reducing curve is very easily obtained by a graphical method, and as shown in Fig. 7(b), the resulted curve is useful for practical purposes. When the connecting points of the cavity of a resonator and the pipe are in two locations or are distributed as Fig. 11, the four-terminal constants are shown in Eq. (28) and (31). In a practical case, when the distance between the two connecting points or the distributing length of connecting points and the total connecting area are very large, the muffler is approximately equivalent to an expansion chamber type muffler as illustrated in Fig. 13.
- 社団法人日本音響学会の論文
- 1971-08-10
著者
関連論文
- 井上回路について
- 尖頭値整流形真空管電圧計を用いた単一パルス波高値測定法に関する研究
- 直流1500V電車線に於けるサーヂの測定結果について
- 気流を伴う音響管の端面における音波の反射
- 同軸円筒状空胴の四端子定数
- 膨張形消音器の円筒状空胴の特性
- 共鳴形消音器の特性計算法
- 膨張形消音器の特性計算法
- ステレオレコードの録音再生特性について(その二) : 各チャンネルのひずみ
- ステレオレコードの録音再生特性について(その一) : 録音限界
- 真空管を含む並列T型RC回路
- 連続可変並列T型RC周波数除去回路の一方式
- 単一可変素子による可変周波数RC発振器(2) : 並列T型RC回路の応用
- ウインブリッジ型及び橋絡T型RC発振器についての一考察
- 単一可変素子による可変周波数RC発振器(1) : ウインブリッジ型発振器