小形水中マイクロホンの簡易校正装置

概要

論文の詳細を見る
A convenient calibration apparatus for a miniaturized hydrophone is described which is primarily intended for intracardiac, intravascular, intrauterine and various other uses in vivo. The present apparatus is composed of two parts to calibrate in a vibrating column of water shown in Fig. 2 and in a closed water-filled chamber shown in Fig. 8. As the first step of the calibration process, a monitor hydrophone (Fig. 5) to be used for a secondary standard is calibrated at low-audio frequencies by immersing the hydrophone in the vibrating column of water. When the water column is vibrated vertically and sinusoidally, the pressure in the water is proportional to the water height h and the acceleration as given by Eq. (4). The values of the correction factor for this apparatus due to wave effects are tabulated in Table 1. The sensitivity of a monitor hydrophone is -125. 4 dB re. 1 V/μbar at 100 Hz, and the frequency response is shown in Fig. 7. The secondary calibration of a miniaturized hydrophone is performed by comparing the unknown output with that of the monitor hydrophone in a closed water filled chamber shown in Fig. 8. Sinusoidal pressure is obtained by driving the diaphragm of the chamber by an electrodynamic vibrator excited by a beat frequency oscillator. Two factors for designing the closed chamber are represented by Eqs. (12) and (13) with a nondimensional parameter χ. The response frequency characteristics of a miniaturized hydrophone was measured by the apparatus mentioned above over the frequency range from 20 Hz to 5 kHz at a sound pressure level over 10^4 μbar. The results of the calibrations are shown in Fig. 13 and 14. Furthermore, the response to a static pressure fairly agreed with that to a sinusoidal pressure. The sensitivity has been measured with an accuracy of about ±1 dB.
社団法人日本音響学会の論文
1977-02-01

小形水中マイクロホンの簡易校正装置

スポンサーリンク

概要

著者

関連論文

スポンサーリンク