Research on the Nondestructive Measurement of Nonlinear Elastic Modulus by Using Ultrasonic Wave
スポンサーリンク
概要
- 論文の詳細を見る
The speed of sound in conventional linear elasticity is determined only by the elastic modulus and the density of the medium. In actuality, however, the speed of sound depends on the stress and this dependency becomes nonlinear as the stress increases. This paper explains such phenomena by introducing the nonlinear elastic modulus. Additionally, the relationship between nonlinear elastic modulus up to the fourth-order and the internal stress is discussed through computer simulations and experiments for an aluminum specimen. In the simulation, it is shown that the third-order elastic constant contributes to the slope of the sound speed vs stress curve and the fourth-order one determines the curvature. Experimental results shows good agreement with the expected result and the ratio of third- and fourth-order elastic constants present significant changes in magnitude and with sign inversion after the internal stress, becomes larger than the yielding stress. These results show that the measurement of nonlinear elastic constants may enable internal stress evaluation.
- 一般社団法人日本機械学会の論文
- 2001-07-15
著者
-
Kim K‐c
National Institute For Materials Science
-
Kim Kyung-cho
Center For Imaging Research And Advanced Materials Characterization Physics Department University Of
-
YAMAWAKI Hisashi
National Research Institute for Metals
-
KIM Kyung
National Institute for Materials Science
-
JHANG Kyung
School of Mechanical Engineering, Hanyang University
-
PARK Jong
Precision Mechanical Engineering, Graduate School of Han Yang Univ.
-
JANG Hyo
Precision Mechanical Engineering, Graduate School of Han Yang Univ.
-
KIM Hong
Precision Mechanical Engineering, Graduate School of Han Yang Univ.
-
HWANG Won
Precision Mechanical Engineering, Graduate School of Han Yang Univ.
-
Jhang Kyung
School Of Mechanical Engineering Hanyang University
-
Yamawaki Hisashi
National Institute For Materials Science
-
Jang Hyo
Precision Mechanical Engineering Graduate School Of Han Yang Univ.
-
Hwang Won
Precision Mechanical Engineering Graduate School Of Han Yang Univ.
-
Yamawaki H
National Institute For Materials Science
-
Kim Hong
Precision Mechanical Engineering Graduate School Of Han Yang Univ.
-
Park Jong
Precision Mechanical Engineering Graduate School Of Han Yang Univ.
-
Kim Kyung-Cho
National Institute for Materials Science
-
Park Jong-Woung
Precision Mechanical Engineering, Graduate School of Han Yang Univ.
関連論文
- Fatigue Process Evaluation of Ultrasonic Fatigue Testing in High Strength Steel Analyzed by Acoustic Emission and Non-Linear Ultrasonic
- Development of Simplified Ultrasonic CT System for Imaging of Weld Metal and It's Comparison with TOFD Method(Experimental Mechanics)
- Ultrasonic Imaging of Welded Metals Using Simplified Ultrasonic Computerized Tomography(Instrumentation, Measurement, and Fabrication Technology)
- Finite Difference Method Analysis of Ultrasonic Nonlinearity in Partially Degraded Material
- Research on the Nondestructive Measurement of Nonlinear Elastic Modulus by Using Ultrasonic Wave
- Noncontact Ultrasonic Imaging of Subsurface Defects Using a Laser-Ultrasonic Technique
- Development of Three-Dimensional Ultrasonic Simulation and Its Application
- SCC Monitoring of Chloride Droplets on Thin SUS304 Plate Specimens by Analysis of Continuous Recorded AE Waveform
- Characterization of the Internal Friction Properties of 2.25Cr-1Mo Steel
- Detection of Ultrasonic Longitudinal and Shear Waves Using Optical Heterodyne Interferometer
- Noncontact Ultrasonic Imaging of Subsurface Defects Using a Laser-Ultrasonic Technique
- In-Situ Observation and Acoustic Emission Analysis for Corrosion Pitting of MgCl_2 Droplet in SUS304 Stainless Steel
- Estimation of Nonlinear Acoustic Parameter Using Bispectral Analysis