Studies on Estimating the Performance of Impellers with Cut-Down of the Blade Edge of the Centrifugal Pump by the Surface Singularity Method

概要

論文の詳細を見る
Pump performance depends on the outlet flow of the impeller. A method of surface singularities for core flow in the centrifugal impeller, combined with an integral method for a boundary layer, would explain the mechanism of the performance change caused by cutting the outlet edge of the impeller blades down. This method is applied to flows in the impellers with various cut-downs of the blade edge, and then the calculated results are compared with the experimental ones. Both results are shown to be quantitatively in good agreement. On the influence of cutting the blade edge on the outlet flow, it is indicated that the cut of the pressure surface results in the decrease of relative flow angle with the decrease of radial velocity in the core flow, while that of the suction surface results only in a decrease in radial velocity. The change in the flow separation region due to the cut on the suction surface, however, contributes to the deterioration of pump performance.
一般社団法人日本機械学会の論文
1990-08-15