高温粒子表面上の蒸気膜崩壊に関する研究:第1報, 蒸気膜崩壊圧力の測定

概要

論文の詳細を見る
In order to clarify the triggering condition for vapor explosion, experiments were conducted by passing pressure pulse through the film boiling on high temperature particle surface. The film collapse behavior was observed by a high speed video camera of maximum speed 40, 500fps. At the same time, time transient of the particle surface temperature and the pressure near the particle were simultaneously measured. As the results, the vapor film started to diminish just after the pressure pulse passing through the particle, then it was observed that many small splashes covered whole of the vapor film at the minimum vapor film thickness. Heat flux released from the particle surface increased with decreasing the vapor film thickness befoer the splashing and the heat flux almost constant after the splashing. It is supposed that the vapor film collapse can be judged by the visual information at the splashing. It was experimentally indicated that the measured pressure at the splashing is almost constant about 0.4MPa independent on the initial particle surface temperature.
社団法人日本機械学会の論文
2000-02-25