くさび形工具による金属板の切断加工のFEMシミュレーション(機械要素,潤滑,工作,生産管理など)
スポンサーリンク
概要
- 論文の詳細を見る
Cutting of a sheet metal by indentation of wedge shape punches is investigated as a process to achieve burr-free-cutting. Numerical simulations of the cutting process are done using a rigid plastic finite element code developed by the authors. Equivalent strain and hydrostatic stress distributions at the deformation region of the sheet are calculated, and the effects of wedge angle on the shape of the cut edge are discussed based on the calculated stress and strain states. To confirm the result of the finite element simulations, cutting experiments are carried out using a mild steel sheet of 3 mm in thickness, and the shape of the cut edge is observed using a scanning electron microscope. The experimental results show that the cutting mode depends very much on the wedge angle α and nose radius γ of punch; when the punch of γ=0.1mm and α=30 degree is used a sheet is separated by cutting, while when α=60 and 90 degrees ductile fracture is caused due to the secondary tensile force induced by the wedge indentation, and when α=120 degree brittle fracture is caused due to excessive work hardening during compression. When the nose radius of punch is increased from 0.1mm to 0.5mm, the deformation of sheet material between upper and lower punches becomes compression rather than cutting because of the suppression of the crack initiation and propagation from the punch nose portion. Therefore, when the punch of γ=0.5mm is used, the separated surface has a very thin flash. These experimental results are qualitatively in good agreement with the simulation results.
- 2002-04-25
論文 | ランダム
- 特別講演記録 子宮内膜症の癌化とその機序
- 板谷式ダイエット--12カ月連続!月替わりダイエットの道(第7回)「断食ダイエット」に挑戦!(1月1日〜31日)
- 三原じゅん子に公選法違反疑惑 ダイエットサプリの"恩返し"!? (ワイド くじけないで)
- 板谷式ダイエット--12ヵ月連続!月替わりダイエットの道(第6回)「ザ・トレーシー・メソッド」に挑戦!(12月1日〜31日)
- 余剰汚泥の減量と排水の高度処理を可能とした「バイオアタック・ダイエットシステム」 (特集 排水処理と汚泥減容化)