On the Non-Uniform Deformation of Material in Axially Symmetric Compression Caused by Friction : Part 2, Theoretical Analysis of Compression of Circular Cylinder by the Finite Element Method
スポンサーリンク
概要
- 論文の詳細を見る
Non-uniform deformation of an elastic, strain-hardening circular cylinder in axial compression is analyzed by the finite element method. Deformation is pursued from elastic through partially plastic to totally plastic stages, allowing for the finite deformation or geometrical change of the material coordinates. As the boundary conditions, the experimentally determined values of the slip-ratio which was proposed by the authors are used instead of the conventional friction coefficient. Calculations of 23 cases are performed for various combinations of lubrication and height to diameter ratio. As the result, the followings have become clear: shape of bulge of the free side surface, relation between the load and the compressive strain, distribution of normal pressure and tangential stress together with the friction coefficient on the boundary surface, mean friction coefficient, patterns of appearance, growth of plastic zones, etc. These results are qualitatively in agreement with the theoretical results which were presented in Part 1 of this series of investigation; i.e. the results obtained by applying variational principle. Agreement with the experimental observations is also satisfactory.
- 一般社団法人日本機械学会の論文
著者
-
Nagamatu Akio
Department Of Technology Tokyo Institute Of Technology
-
MUROTA Tadao
Department of Technology, Tokyo Institute of Technology
-
JIMMA Takashi
Department of Technology, Tokyo Institute of Technology
-
Murota Tadao
Department Of Mechanical Engineering Tokyo Institute Of Technology
-
Jimma Takashi
Department Of Technology Tokyo Institute Of Technology
関連論文
- On the Non-Uniform Deformation of Material in Axially Symmetric Compression Caused by Friction : Part 2, Theoretical Analysis of Compression of Circular Cylinder by the Finite Element Method
- On the Non-Uniform Deformation of Material in Axially Symmetric Compression Caused by Friction : Part 1, Comparsion of Results of Analysis Using Calculus of Variations with Experiments Concerning Compression of Cylinder
- On the Non-Uniform Deformation of a Block in Plane-Strain Compression Caused by Friction : Part 3, Analysis by Finite Element Method when Surface Sticks on Tool
- On the Non-Uniform Deformation of Block in Plane-Strain Compression Caused by Friction : Part 2,Experiments and Proposition of Relative Slip Ratio
- On the Non-Uniform Deformation of a Block in Plane-Strain Compression Caused by Friction : Part 4, Analysis by Finite Element Method in General Conditions
- Theoretical Study of Shear Spinning
- Deformation Modes and Wrinkling of Flange on Shear Spinning
- Experimental Study of Shear Spinning
- On the Non-Uniform Deformation of Block in Plane-Strain Compression Caused by Friction : Part 1,Theoretical Analysis Using Calculus of Variations