Biaxial Low-Cycle Fatigue of Anisotropic Rolled Steel Plates
スポンサーリンク
概要
- 論文の詳細を見る
The biaxial low-cycle fatigue properties of anisotropic rolled steel plates were investigated. Biaxial low-cycle fatigue tests were conducted by utilizing the principle of anticlastic bending of flat rhombic plates. Crack initiation and propagation were examined with special reference to angles between the applied principal stress axes and the anisotropy axes of the material studied. The biaxial fatigue life of anisotropic specimens cut out in a given direction satisfied a linear relation on a log-log scale between an equivalent strain range and the number of cycles to failure. The direction of crack initiation under the uniaxial and biaxial stress conditions was coincident with that of the maximum shear stress. The fatigue life under the uniaxial stress condition was shorter than that determined under the biaxial stress condition for a given value of the equivalent strain range. The discrepancies were interpreted in terms of both normal stress component acting on the crack surface and the modes of crack propagation.
- 一般社団法人日本機械学会の論文
著者
-
Ogura Keiji
Assistant Professor Faculty Of Engineering Osaka University
-
HARADA Shoji
Research Assistant, Faculty of Engineering, Osaka University
-
OHJI Kiyotsugu
Faculty of Engineering, Osaka University
-
OGURA Keiji
Faculty of Engineering, Osaka University
-
HARADA Shoji
Faculty of Engineering, Osaka University
-
SENGA Heizo
Kobe Steel, Ltd.
-
Ogura Keiji
Faculty Of Engineering Science Osaka University
-
Senga Heizo
Kobe Steel Ltd.
-
Harada Shoji
Research Assistant Faculty Of Engineering Osaka University
-
Ohji Kiyotsugu
Professor Faculty Of Engineering Osaka University
-
Ohji Kiyotsugu
Faculty Of Engineering Osaka University
-
Harada Shoji
Faculty Of Engineering Osaka University
関連論文
- Fatigue Crack Growth Behavior of Anisotropic Rolled Steel Plate with Special Reference to Laminated Structure and Inclusions
- Fatigue Behavior of Anisotropic Rolled Steel Plates under Cyclic Torsion
- Observation of Low-Cycle Fatigue Crack Initiation and Propagation in Anisotropic Rolled Steel under Biaxial Stressing
- The Effect of Torsional Prestrain on the Tensile and Low-Cycle Fatigue Properties of Mild Steel
- Biaxial Low-Cycle Fatigue of Anisotropic Rolled Steel Plates
- Estimation of Stress and Strain at the Notch Root in the Elastic-plastic Range using the J-integral
- Simple Methods of Estimating the Stress and Strain at the Notch Root
- Crack Growth Behavior of Hydrogenated Austenitic Stainless Steel by High Temperature Cathodic Charging : Solid-Mechanics, Strength of Materials
- A Simple J-Integral Formula for Mode III Cracks Emanating from Notches : Solid-Mechanics, Strength of Materials
- Thermal Residual Stresses in Bonded Dissimilar Materials and Their Singularities
- Numerical Investigation of Three-Dimensional Crack Measurement by the Electric Potential CT Method : Solid-Mechanics, Strength of Materials
- New Flaw Inspection Technique Based on Infrared Thermal Images under Joule Effect Heating
- Effect of Stress Reduction of Secondary Creep of Mild Steel
- New Developments in Fracture Surface Analysis Using X-Ray and Laser
- The Role of Crack Closure on Fatigue Threshold at Elevated Temperatures
- Effect of Oxide and Roughness on Fatigue Crack Growth Threshold in Low Carbon Steel at Elevated Temperature : Solid-Mechanics, Strength of Materials
- On the Anisotropy of Low-Cycle Fatigue Properties of Rolled Plates
- A Comparison of the Axial and Reversed-Torsional Strain Cycling Low-Cycle Fatigue Strength of Several Structural Materials
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (III) Prediction of the Creep Deformation under Periodic Stresses
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (II) Creep Deformation under Unsymmetrical Periodic Stress Waves
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave
- The Elastic Analogue in Creep Stress Analysis
- Micellar catalytic effect on the base dissociation of methylamine studied by the ultrasonic absorption method.