一方向強化CFRP積層板の繰返し荷重下における層間はく離進展に及ぼす試験温度および荷重繰返し周波数の影響
スポンサーリンク
概要
- 論文の詳細を見る
The effects of frequency and temperature on the delamination crack growth under cyclic loading were investigated with unidirectional CF/epoxy laminates. Tests were conducted at room temperature, 50℃, and 80℃ in air with double contilever beam (DCB) specimens. At room temperature, the growth rate in terms of number of cylces, da/dN, was given by a power function of the stress intensity range, ΔK, when da/dN was larger than 5×10^<-9>(m/cycle). The relation was almost independent of the loading frequency. At 50゜C and 80゜C, the growth rate in terms of number of cycles, da/dN, was given by a power function of the stress intensity range, ΔK, when da/dN was larger than 5×10^<-11> (m/cycle). When compared at the same value of ΔK, the growth rate, da/dN was higher for higher temperature and for lower frequency. However, the growth rate expressed in terms of time, da/dt, was found to be controlled by the maximum stress intensity factor, K_<max>, independent of the loading frequency at the same temperature, I. E., the delamination crack was considered to have grown by time dependent mechanisms under cyclic loading. The da/dt-K_<max> relation also depended on temperature. For higher temperature, the growth rate, da/dt, was higher at the same value of K_<max>.
- 社団法人日本材料学会の論文
- 1993-04-15
著者
-
大路 清嗣
大阪大学工学部
-
中井 善一
神戸大学工学部
-
大路 清嗣
龍谷大学理工学部
-
山守 博文
川崎重工業(株)車輌事業本部
-
中村 政晴
ヤマハ発動機(株)技術本部
-
山守 博文
川崎重工業
-
中井 善一
神戸大学工学研究科
関連論文
- 爆接黄銅クラッド鋼およびロール圧接ニッケルおよび黄銅クラッド鋼の疲労き裂伝ぱ挙動
- 圧延異方性材の高繰返し数平面曲げ疲労 : 平滑材及び切欠き材の疲労過程に及ぼす層状組織及び介在物の影響
- 有限要素法による環状切欠き丸棒のクリープ変形と応力分布
- 高強度アルミニウム合金の腐食疲労における短い表面き裂の伝ぱ挙動に及ぼす応力比および溶存酸素濃度の影響
- J積分数値解析の比較 : CT試験片のラウンドロピン解析
- 爆接ならびにロール圧接した黄鋼クラッド鋼の疲労き裂伝ぱ挙動とき裂開閉口
- 圧延異方性鋼板の疲労き裂伝ぱに及ぼす層状組織及び介在物の影響
- 圧延異方性材の中・高繰返し数ねじり疲労 : 平滑材およびき裂材の疲労過程に及ぼす層状組織および介在物列の影響について
- 圧延異方性材の繰返しねじり応力下疲労
- 異方性材料の2軸応力下低繰返し数疲れ : 表面における疲れ被害の連続観察