ニッケルー銅合金の突合せ銀ろう継手の疲労強度
スポンサーリンク
概要
- 論文の詳細を見る
The fatigue strength of silver-filler brazed joints in nickel-copper alloys was studied along with tensile strength with emphasis on the influence of filler metal, base metal and joint clearance. The brazed joint with low-melting-point filler metal contained many large defects such as blow holes, and both tensile, so that its fatigue strength was low. The strength was high for high-melting point filler metals due to a decrease in defects. However, the fatigue strength was not so high as expected from an increase in tensile strength, because the former was more sensitive to defects than the latter. Base metal with higher elastic constants constrained the deformation of filler metal, causing the fatigue strength to increase. The effect of joint clearance on the fatigue properties did not appear clearly, because the effect of defects was much more that of joint clearance.
- 1991-10-15
論文 | ランダム
- B-10-51 FDM光ファイバー伝送システムにおける変調方式とFWM光雑音の関係(B-10.光通信システムA(線路),一般講演)
- B-10-36 FDM光ファイバー通信における周波数配置,偏波配置,ゼロ分散周波数の影響(B-10.光通信システムA(線路),一般講演)
- B-10-63 FDM光ファイバー通信における周波数配置の提案と解析(B-10.光通信システムB(光通信),一般講演)
- B-10-62 FDM光ファイバー通信における周波数配置と偏波配置の影響(B-10.光通信システムB(光通信),一般講演)
- A-5-44 FDM光ファイバー通信における周波数配置とゼロ分散周波数の影響(A-5.ワイドバンドシステム,一般講演)