AN31 合金鋼の溶接割れ部の組織について
スポンサーリンク
概要
- 論文の詳細を見る
Investigation was made of the structure of crack region observed at the center of the first weld layer of AN 31 alloy steel. the weld crack originated in the boundaries of dendritic grains containing the primary and secondary precipitates. From the results of the X-ray, microphotographic and differential thermal analyses, it is clearly to be seen that the primary precipitates are Nb (C・・N) intermetallic compound consisting of lattice constant: 4,404Å which does not dissolve in matrix even by heating at 1300℃, and that the secondary fine precipitates that appear in the grain boundary regions by tempering at about 900℃ are the same as Z phase (MNb_2) which were reported by Andrews et al. (1957). From these results, it is evident that the weld crack had originated in the incoherent interfaces of the matrix and the primary precipitates at higher temperature than 1000℃ in rapid cooling stage after solidification.
- 社団法人日本材料学会の論文
- 1968-07-15
著者
関連論文
- 基本溶接継手の残留応力分布と溶接諸条件の関係
- 溶接1層めに約5%のフェライトを含むAN31合金鋼の組織とクリープ強度
- AN31 合金鋼の溶接割れ部の組織について
- 18・8 ステンレス鋼溶接部の高温強度について
- 薄肉円筒殼の溶接残留応力・たわみ変形の支配パラメータとその影響(昭和59年度秋季全国大会論文発表講演論文)
- 薄肉円筒殼の軸方向溶接による残留応力・変形(昭和58年度秋季全国大会論文発表講演論文)
- 薄肉円筒殻の周方向溶接による残留応力・変形
- 任意の領域に存在する一様固有ひずみによる薄肉円管の応力と変形
- 繰返し荷重下におけるAl-3.5%Cu合金の時効について