MICROSTRUCTURE DEGRADATION IN STAINLESS STEEL WELD METALS DUE TO THERMAL AND MECHANICAL HISTORIES

概要

論文の詳細を見る
In order to develop a long term creep-fatigue evaluation method of stainless steel weldment, that incorporates the degradation of weld metal, the authors have looked into the mechanism of micro damage in the structure of type 308 and 316 weld metals that had been subjected to thermal and mechanical histories using transmission electron micrography. The results obtained were as follows: 1) Carbide(M_<23>C_6) and Laves phase that precipitated in δ-ferrite phase were transformed into σ-phase being more stable at high temperatures after long time heating. 2) While δ-ferrite phase remained in the microstructure at 550℃ even after the change of its composition due to the transformation, above 600℃, it disappeared after the complete transformation into σ or austenitic phase. 3) The rate of dissolution of δ-ferrite phase under cyclic stresses for fatigue or creep-fatigue failure was higher than the one under constant stress for creep failure; it was also increased by a factor of 10 to 100 in comparison with an unloaded case. 4) The dissolution of δ-ferrite phase led to initiation and propagation of cracks at the interfaces of σ and remaining δ-ferrite or austenitic phase, causing a difference of mechanical properties between them.
社団法人日本材料学会の論文
1997-09-15