Al 合金の二三の性質に就て(第 1 報)
スポンサーリンク
概要
- 論文の詳細を見る
The author determined the effects of the addition of a small amount of metals such as iron, silicon, magnesium, calcium, lead, tin, zinc, cadmium, bismuth, antimony, copper, nickel and manganese, upon the properties of aluminium (99.8%). The specimens were chill-cast in mould and were cold-drawn to wires using dies. These were annealed at 300℃ for 4 hours. For quenching, these annealed specimens were heated to 500℃ or 550℃ ; after having been kept at such temperature for one hour, they were quenched in cold water. For measuring the specific electrical resistance, a Leeds & Northrup type potentiometer was used. All measurements were made at 20℃. The tensile strength of specimens has been determined by a Schopper's testing machine. A summary of the results of the investigation is given below. (1) With addition of iron, the specific electrical resistance and tensile strength gradually increased. (2) In the hard drawn and annealed specimens, the specific electrical resistance increased with addition of silicon, whilst in the specimens which was quenched from 500℃, the direction of curves, was changed at 0.79% silicon. This result is in conformity with the solubility of silicon to aluminium at 500℃. (3) Cadmium, antimony, lead, bismuth and tin had no remarkable effect on these properties. (4) Magnesium, copper, zinc, nickel and manganese increased the specific electrical resistance and simultaneously the tensile strength. (5) The effects of magnesium on aluminium which contains 0.5%, silicon were noticable. The specific electrical resistance of the hard drawn and annealed specimens was not increased, until the addition of magnesium became equivalent to the silicon content. But, the specific electrical resistance was rapidly increased, when magnesium was added more than 1.0%. (6) The effects of calcium on aluminium containing 0.45% silicon, have shown nearly the same effects as magnesium.
- 社団法人日本鉄鋼協会の論文
- 1938-12-25