高伸びフランジ性高炭素熱延鋼板の開発(力学特性)

概要

論文の詳細を見る
The effect of microstructure on the stretch-flangeability of JIS S35C hot-rolled steel sheets was studied from the viewpoint of the initiation/growth of voids in the hole-expanding process with ferrite-pearlite and spheroidized cementite steels. In a comparison of ferrite-pearlite steel and spheroidized fine-grained cementite steel, total elongation was higher with the ferrite-pearlite structure, while the hole-expanding ratio (λ) of the spheroidized cementite structure, which is an index of stretch-flangeability, was superior to that of the ferrite-pearlite structure. The hole-expanding ratio has a strong correlation with notched-tensile elongation, and a linear relationship was obtained with a long gauge length of GL=50mm. A notch-shaped crack occurred at the surface of the punched hole of the ferrite-pearlite steel in the hole-expanding test and rapidly propagated along the ferrite-pearlite interface in the subsequent hole-expanding process. In contrast, the punched hole surface of the spheroidized cementite steel was smooth, and after void initiation/growth in the hole-expanding process, voids developed into cracks by coalescence, resulting in a homogeneous distribution of work strain.
社団法人日本鉄鋼協会の論文
2005-10-01