ピンチ力による矩形管内溶鋼流からの介在物除去の数値解析

概要

論文の詳細を見る
Application of the pinch force to the separation of inclusion particles from liquid steel flowing in a rectangular pipe was investigated theoretically. By impressing an electrical current in a liquid metal along the axis of the pipe, the metal will receive a pinch force and electrically nonconductive particles suspended in the metal will be squeezed out by this force. In the case of rectangular pipe, the pinch force is concentrated near the corner of the pipe at high frequencies, and as a result secondary flows may be generated in the cross section of the pipe. These flows will affect the particle-separation efficiency. Numerical calculations were made to obtain the pinch force, fluid flow and particle concentration. In the quarter section of the pipe, two recirculating flows were generated and their maximum velocity increased with increasing x_1/δ. Pipe Reynolds number, Re(=2x_1 w^^-/ν), decreased rapidly after x_1/δ exceeded a critical value which changed with C_1(=μ_eI_<rms>^2/ρν^2). The particle-separation efficiency, η, was a function of (C_1D_R^2/Re)Z while the secondary flows are negligible. The value of η was found to increase with increasing x_1/δ because of the development of the secondary flows. This result is a contrast to the case of circular pipe investigated in the previous study.
1994-04-01