TiB_2-フェライトの相平衡にもとづく高剛性鋼の開発
スポンサーリンク
概要
- 論文の詳細を見る
A new TiB_2-reinforced steel with an enormously high Young's modulus has been developed for enabling a leaner design of automobile parts. This article describes the high modulus steel (HMS) with an emphasis on its microstructure and potential elastic properties based on the assessed phase equilibria in Fe-Cr-Ti-B system. The concept was to increase the isotropic Young's modulus by the optimum combination of reinforcing particles and steel matrices, and thermodynamic considerations strongly supported the most effective contribution of TiB_2 to this purpose. Calculated phase diagrams located the narrow two-phase region of ferrite (α)+TiB_2 along the pseudo-binary system of (Fe-17Cr)-TiB_2 in a wide temperature range. The proved phase stability and the small solubility of iron/chromium in TiB_2 were considered most responsible for maintaining its own high modulus of 540 GPa in the steel matrix. In conventional powder metallurgy techniques, TiB_2 particles were successfully dispersed in the matrix using commercial TiB_2 powders, or synthesized through the in-situ reaction of ferro-titanium and ferro-boron powders. The measured Young's modulus of the HMS agreed well with the theoretically predicted value, and at 46 vol% TiB_2, the specific modulus reached twice of those of conventional steels owing to its reduced density.
- 社団法人日本鉄鋼協会の論文
- 1998-08-01
著者
-
田中 浩司
(株)豊田中央研究所材料1部
-
斉藤 卓
豊田中央研究所
-
田中 浩司
(株)豊田中央研究所 先進金属研究室
-
大島 正
(株)豊田中央研究所
-
斉藤 卓
(株)豊田中央研究所
-
田中 浩司
(株)豊田中央研究所
関連論文
- 粉末冶金法により作製した高生体適合性β型チタン合金の機械的性質
- 高生体適合性β型チタン粉末冶金合金の機械的性質
- 粉末冶金法による低コスト・高性能チタン基複合材料の開発
- ターボチャージャ用高性能合金
- ターボチャージャ用高性能合金
- B-3 ターボチャージャ用高性能合金(材料)
- 低濃度でCr置換したセメンタイト箔による液相接合組織と接合強度
- 拡散シミュレーションによる鉄系高炭素箔と鋼材との液相挙動予測
- 超高剛性鋼の開発
- 低コスト原料粉を用いた高剛性鋼(ホウ化物分散型高剛性鋼の開発-3)
- TiB_2 粒子強化型高剛性鋼の機械的性質と熱間加工性
- CALPHAD法ソフトウェアを実用に役立てるために
- 粒界セメンタイトの成長速度論にもとづく真空浸炭組織の計算予測
- 真空浸炭中の炭素,セメンタイト分布に対する組成の影響
- TiB_2-フェライトの相平衡にもとづく高剛性鋼の開発
- 溶製高剛性鋼の熱間加工性(ホウ化物分散型高剛性鋼の開発-5)
- 溶製法で作製した高剛性鋼(ホウ化物分散型高剛性鋼の開発-4)
- ターボチャージャ用高性能合金 (Special Issue:可変容量・高過給ターボ)
- 溶製高剛性鋼の特性 : ホウ化物分散型高剛性鋼の開発-6
- 多元系拡散ソフトを利用した浸炭組織の計算
- ホウ化物分散型高剛性鋼の開発
- メタルハニカム触媒担体用ステンレス鋼箔の高温酸化にともなう異常伸び現像
- 表面エネルギーを活用した低温固相接合技術の開発