高炉シャフト部における装入物の性状変化について

概要

論文の詳細を見る
The burden material samples taken from the three levels of the Tobata No 1 BF shaft were classified in sinter, hematite ore (Swaziland), magnetite ores (Chilli and Dungun) and so on. The size distribution, degree of reduction and microstructure of them were also examined. Large increases of small particles (-5 mm) of the iron ores were observed in the sample from the level of 3 m bellow the stock line and the mixing ratio of the ores from the level of 8m bellow was close to the proportion of the used ores in operation. The bursting of iron ore is considered to be related with the both reduction and turbulent mixing in the shaft. It was found that the silicate glass matrix of sinter became rich in CaO and poor in Al_2O_3 during reduction and the calcium ferrite transformed into the spinel of FeO-Fe_2O_3-Al_2O_3 system. The effect of the composition change of sinter on the softening is discussed.
社団法人日本鉄鋼協会の論文
1969-02-01