Heat transfer characteristics of a radial heat pipe
スポンサーリンク
概要
- 論文の詳細を見る
Heat transfer characteristics of a newly designed heat pipe which transports thermal energy in a radial direction of the heat pipe are examined experimentally using Freon R-113 working fluid. The heat pipe produces a much higher overall heat transmission than the current heat pipe due to a direct contact condensation instead of a filmwise condensation. An unheated vapor space above a heated section and a higher charge rate over 70% are required to use it in a wide range of heat flux. Normal screen wick presents an insufficient capillary force to pump up the working fluid to the heated section against the gravity force.
- 宇宙航空研究開発機構の論文
著者
-
Amezawa Hiroo
Japan Atomic Energy Research Institute
-
Ito Haruhiko
Japan Atomic Energy Research Institute
-
KAMINAGA Fumito
Faculty of Engineering, Ibaraki University
-
OKAMOTO Yoshizo
Faculty of Engineering, Ibaraki University
-
YOTSUKURA Terumitsu
Graduate Student, Ibaraki University
-
SAITO Takasi
Japan Atomic Energy Research Institute
-
Okamoto Yoshizo
Faculty Of Engineering Ibaraki University
-
Kaminaga F
Ibaraki Univ. Ibaraki Jpn
-
Kaminaga Fumito
Faculty Of Engineering Ibaraki University
-
Yotsukura Terumitsu
Graduate Student Ibaraki University
関連論文
- Heat transfer characteristics of a radial heat pipe
- 1115 Forced Convective Boiling in a Capillary Tube
- E203 TWO-PHASE HEAT TRANSFER IN A SMALL DIAMETER TUBE UNDER SUB-ATMOSPERIC PRESSURE(Boiling two-phase flow)
- Boiling Heat Transfer Characteristics in a Small Diameter Tube under Forced Convective Condition (宇宙航行力学シンポジウム講演論文集)
- Reflooding Phenomena in a Single Heated Rod : Part 2 Analytical Study
- Reflooding Phenomena in a Single Heated Rod : Part 1, Experimental Study
- Measurement of Turbulent Heat Transfer Coefficients Using Infrared Thermography near Ambient Conditions and Its Quantitative Error Estimation
- Heat transfer model for dispersed flow regime during reflood.