Removal of Liquid and Solid Impurities from Uranyl Nitrate Hexahydrate Crystalline Particles in Crystal Purification Process

概要

論文の詳細を見る
The purification behavior of uranyl nitrate hexahydrate (UNH) was investigated to evaluate the decontamination performance of liquid and solid impurities using a dissolver solution of mixed oxide (MOX) fuel in batch experiments. The UNH crystal recovered from the MOX fuel dissolver solution containing simulated fission products (FPs) was purified by a sweating and melt filtration process. Although the decontamination factors (DFs) of Pu, Cs, and Ba did not change in the sweating process, that of Eu increased with increases in temperature and time. These results indicate that liquid impurities such as Eu were effectively removed by the sweating method, but solid impurities such as Pu, Cs, and Ba were minimally affected in the batch experiments. On the other hand, the DF of Ba increased with 0.45 and 5.0 μm filters in the melt filtration process. Since Pu and Cs formed as Cs2Pu(NO3)6 in the course of U crystallization and was accompanied with the UNH crystal, these behaviors were similar to each other. Although the DFs of Pu and Cs did not change with the 5.0 μm filter, it increased approximately twofold with the 0.45 μm filter. The particle size of Cs2Pu(NO3)6 is relatively small and might pass through the 5.0 μm filter in the melt filtration process. The liquid impurities as Eu remained in the molten UNH crystal with some filters.
2011-03-01