Numerical Simulation of Particle Agglomeration and Bed Shrink in Sintering Process

スポンサーリンク

概要

• 論文の詳細を見る

• The motions of the particles and the gas in the actual scale sintering bed were simulated to elucidate the mechanism of the bed structure changes, the bed shrink and the local void formations by the simultaneous calculation of Navier–Stokes equations and the Lagrangian DEM equations based on the simple sintering model in which the phase change of particles and the cohesion forces due to the liquid bridges among particles were considered.The bed shrink rate decreased with the moving downward of the melting zone. This is mainly because the weight of the particle bed increases with increasing the bed height. The gap of the particle motions occurred between the zones of which the content and the contact number were largely different. The gap separates contact particles and the crack appears. The shrinks of the beds with the large particles (MEBIOS particle) were smaller than that of the bed without the large particles. The reasons are that the large particles do not change the particle volume and also the high void region around the large particles is formed. The crack did not occur in the particle bed placing the large particles. The large scale zones of which the content and the contact number are largely different are cut off by the large particles and the small crack originated from the separation of contact points between iron ore particles does not grow by the existence of the large particles. After the sintering the high number density areas on the large particles and the void areas under the large particles were formed. This is because the large particles with smaller particle density relatively ascend among the small particles with the larger particle density. The void areas under the large particles advance the aggregation among the small particles which do not contact with the large particles.

• 社団法人 日本鉄鋼協会の論文
• 2009-05-15

著者

• Yuu Shinichi

  Ootake R And D Consulting Office

• Yuu Shinichi

  Ootake R & D Consultant Office

• UMEKAGE Toshihiko

  Graduate School of Engineering, Department of Mechanical and Control Engineering, Kyushu Institute o

• Umekage Toshihiko

  Graduate School Of Engineering Department Of Mechanical And Control Engineering Kyushu Institute Of

関連論文

• Constitutive Relations Based on Distinct Element Method Results for Granular Materials and Simulation of Granular Collapse and Heap by Smoothed Particle Hydrodynamics, and Experimental Verification
• Constitutive Relations and Computer Simulation of Granular Material
• Numerical Simulation of Particle Agglomeration and Bed Shrink in Sintering Process
• Numerical Simulation of Particle and Air Velocity Fields in Raceway in Model Blast Furnace and Comparison with Experimental Data (Cold Model)
• Large Scale Simulation of Coke and Iron Ore Particle Motions and Air Flow in Actual Blast Furnace
• Numerical Simulation of Effect of Tuyere Angle and Wall Scaffolding on Unsteady Gas and Particle Flows Including Raceway in Blast Furnace
• Simulation of Sintering Process -Effects of Air Flow, Liquid Film Cohesion Force and Fixation Process on Large Scale Crack-
• Simulation of Sintering Process : Effects of Air Flow, Liquid Film Cohesion Force and Fixation Process on Large Scale Crack

スポンサーリンク