Intensification of Bubble Disintegration and Dispersion by Mechanical Stirring in Gas Injection Refining

概要

論文の詳細を見る
Water model experiments were performed for establishing highly efficient gas injection refining processes. Mechanical stirring was applied to disintegrate the injected bubbles and to disperse them widely in the bath. The bubble disintegration and dispersion were investigated by changing rotation mode (direction of rotation), rotation speed, blade size of the impeller and gas flow rate. Forward rotation of the impeller induced a stable tangential flow and could not disperse bubbles in the bath due to formation of a vortex around the impeller shaft. The tangential flow could be suppressed by forward–interrupt rotation, which could reduce the vortex formation to some degree. However, forward–interrupt rotation could not disperse the bubbles widely in the bath. Forward–reverse rotation could prevent the vortex formation completely and create a strong shear stress field, which intensified the bubble disintegration and dispersion in the bath. Higher impeller rotation speed and larger blade length in forward–reverse rotation could enhance the bubble disintegration and make the dispersed bubbles smaller. The bubble dispersion zone became wider with larger blade length. The bubble size tended to be larger at higher gas flow rates. However, its dependence on the gas flow rate became smaller at higher impeller rotation speed.
社団法人日本鉄鋼協会の論文
2009-01-15