Observations of the Mineral Matter Material Present at the Coke/Iron Interface During Coke Dissolution into Iron
スポンサーリンク
概要
- 論文の詳細を見る
In this study, the mineral matter layer that forms between coke, and liquid iron during carbon dissolution has been characterised. Rectangular prisms of coke were immersed in an iron–2 mass% carbon melt at representative ironmaking temperatures for 20 min then drop quenched. The quench sample was then sectioned and the coke–iron interface was examined in the SEM. A mineral matter layer was observed at the experimental temperatures 1400°C, 1450°C and 1500°C, but not at 1550°C. Though no layer was found at 1550°C a slag was observed on the metal surface. This slag was not evident at other temperatures. The formation of the mineral matter layer and its temperature dependence is described in terms of a temperature activated fusion process. Further the mineral matter layer and adjacent coke were found to be significantly depleted in SiO2. This has been explained in terms of SiO2 reduction.
- 社団法人 日本鉄鋼協会の論文
- 2007-07-15
著者
-
Chapman Michael
Pyrometallurgical Research Group University Of Wollongong
-
MONAGHAN Brian
PYROmetallurgical Research Group, University of Wollongong
-
NIGHTINGALE Sharon
PYROmetallurgical Research Group, University of Wollongong
-
MATHIESON John
BlueScope Steel Limited
-
NIGHTINGALE Robert
BlueScope Steel Limited
-
Nightingale Sharon
Pyrometallurgical Research Group University Of Wollongong
-
Monaghan Brian
Pyrometallurgical Research Group University Of Wollongong
関連論文
- Analysis of Fume Formation Rate and Fume Particle Composition for Gas Metal Arc Welding (GMAW) of Plain Carbon Steel Using Different Shielding Gas Compositions
- Influence of Shielding Gas on Fume Size Morphology and Particle Composition for Gas Metal Arc Welding
- Liquid Iron Wetting of Calcium Aluminates
- Observations of the Mineral Matter Material Present at the Coke/Iron Interface During Coke Dissolution into Iron
- Three-dimensional Simulation of Flow and Combustion for Pulverised Coal Injection
- Reducing Net CO2 Emissions Using Charcoal as a Blast Furnace Tuyere Injectant
- Reducing Net CO_2 Emissions Using Charcoal as a Blast Furnace Tuyere Injectant