Monolithic Fabry–Perot Wavelength Tunable Filter with Electrothermal Actuation

概要

論文の詳細を見る
We report on a micromachined monolithic Fabry–Perot wavelength tunable filter with a thick moving structure operated by an electrothermal actuation. The monolithic structure simplifies the fabrication process and the electrothermal actuation mechanism reduces the required operation voltage. For the wet etching of the AlGaAs sacrificial layer, an HCl-based solution rather than a HF-based one was used because it results in a larger selectivity between the AlxGa1-xAs layers and less damage to the suspended structure. The wavelength tuning range of the 7.64-μm-thick structure was 47 nm for the power consumption of 5 mW, which results in the high tuning efficiency of ${\sim}9.9$ nm/mW. The wide tuning range of 81.2 nm for the 5.2-μm-thick structure, that is not possible with an electrostatic actuation mechanism due to the occurrence of breakdown, is achieved at the driving voltage below 5.7 V. Due to the simplicity of fabrication and the ease of integration, this structure is advantageous for use in wavelength tunable light sources and photodetectors.
Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
2005-02-15