Effect of Vacuum on Mixing Behavior in a Ladle-a Watermodel Study
スポンサーリンク
概要
- 論文の詳細を見る
Rising inert gas bubbles in a vacuum ladle experience phenomenal expansion in the top portion of the bath due to the steep variation of absolute pressure. This makes the top layers of the melt substantially more agitated than the bottom regions. The present study is an attempt to characterize the mixing process in such a vacuum ladle by a watermodel, simulating the effect of extra stirring in the top layers of the bath. The simulation is done through a two-level blowing, in which an additional gas stream is injected into the main bubble plume at 75 % of the bath height. It was found that mixing under such a simulated condition is worse than that in a bottom purged ladle, for identical total energy inputs to the bath. The study reveals that the energy imparted in the top layers of the liquid in the vacuum ladle is less effective in promoting mixing. The pattern of stirring energy input distribution along the height of the bath is an important parameter in determining the mixing behavior in a ladle, apart from the total energy input.
- 社団法人 日本鉄鋼協会の論文
- 1999-11-15
著者
-
Ballal N
Indian Inst. Technol. Bombay Ind
-
Ballal N.
Department Of Metallurgical Engineering And Materials Science Indian Institute Of Technology
-
Krishnakumar K.
Department Of Metallurgical Engineering And Materials Science Indian Institute Of Technology Bombay
関連論文
- Influence of Thermal and Mechanical Processing on Room Temperature Mechanical Properties of Nickel Free High Nitrogen Austentic Stainless Steels
- Influence of Mechanical Processing and Heat Treatment on Microstructure Evolution in Nickel Free High Nitrogen Austentic Stainless Steels
- Processing Nickel Free High Nitrogen Austenitic Stainless Steels through Conventional Electroslag Remelting Process
- Effect of Carbon Content on Mechanical Properties of Electroslag Remelted Fe_3Al Based Intermetallic Alloys
- Processing of Fe_3Al Based Intermetallic Alloys through Electroslag Remelting
- Effect of Hot Working on Room Temperature Mechanical Properties and Stress-rupture Behaviour of ESR Processed Fe-16wt%Al Intermetallic Alloys
- Development of Fe_3Al Based Intermetallic Alloys by Electroslag Remelting
- Effect of Vacuum on Mixing Behavior in a Ladle-a Watermodel Study
- Mass Transfer in Porous Solids under Pulsating Pressure Conditions
- Development of Ultrahigh Strength Steel by Electroslag Refining : Effect of Inoculation of Titanium on the Microstructures and Mechanical Properties
- Water Model Experiments on Mixing Phenomena in a VOD Ladle