スポンサーリンク
Materials Research Laboratory, Kobe Steel, LTD. | 論文
- Effect of P Content on Stress Relaxation and Clustering Behavior in Cu-Ni-P Alloys
- Evaluation of Susceptibility to Hydrogen Embrittlement of 7075 Aluminum Alloy by Hydrogen Addition Using Flax-Treatment Method
- Calculations of Internal Oxidation Rate Equations and Boundary Conditions between Internal and External Oxidation in Silicon Containing Steels
- Physical Properties of Iron-Oxide Scales on Si-Containing Steels at High Temperature
- Calculation of Ferrite Decarburizing Depth, Considering Chemical Composition of Steel and Heating Condition
- Direct Observations of Cracks and Voids in Structural Materials by X-ray Imaging Using Ultra-bright Synchrotron Radiation
- Roughness Estimation of Polycrystalline Iron Surface under High Temperature by Small Glancing Angle X-ray Scattering
- Process Design of Extend Forging Process Using Numerical Simulation Development of Process Design Method for the Finish Forging Process
- Charging Damage of SOI Wafer Diagnosed by Scanning Maxwell-Stress Microscopy
- Cryogenic mechanical properties of Ti-6Al-4V alloys with three levels of oxygen content
- Influence of Oxides on Microstructure and Notch Toughness of Weld Metal with Flux-cored Wires for High Strength Steel
- Near Net Shape Forging of Titanium Alloy Turbine Blade.
- Active Corrosion Rate for Ti-based Alloys in Aqueous Corrosion and Its Correlation with the Bond Order Obtained by Electron Theory.
- Tensile and Fatigue Properties of Carbon-Solute-Strengthened (α+β)-Type Titanium Alloy