スポンサーリンク
Division Of Applied Process Metallurgy Department Of Materials Science And Engineering Royal Institu | 論文
- Physical-modeling Study of Fluid Flow and Gas Penetration in a Side-blown AOD Converter
- Fluid Flow in a Combined Top and Bottom Blown Reactor
- Effect of Oxide Catalyst on Heterogeneous Nucleation in Fe-10mass%Ni Alloys
- Effect of Nozzle Swirl Blade on Flow Pattern in Runner during Uphill Teeming
- Some Aspects on Grain Refining Additions with Focus on Clogging during Casting
- Corrosion Mechanism of Commercial MgO-C Refractories in Contact with Different Gas Atmospheres
- Effect of Entrance Nozzle Design on the Fluid Flow in an Ingot Mold during Filling
- Effect of Interfacial Energy on the Drain Sink Formation Height
- Prediction and Disarming of Drain Sink Formation during Unsteady-state Bottom Teeming
- Development of Flow Field and Temperature Distribution during Changing Divergent Angle of the Nozzle When Using Swirl Flow in a Square Continuous Casting Billet Mould
- Design of Swirling Flow Submerged Entry Nozzles for Optimal Head Consumption between Tundish and Mold
- A Mathematical Model of an Impinging Air Jet on a Water Surface
- Dynamic Coupling of Computational Fluid Dynamics and Thermodynamics Software : Applied on a Top Blown Converter
- Size Distribution of Deoxidation Products with Ti, Pr and Ti/Pr in Fe-10mass%Ni Alloy
- Mixing Time in a Side-Blown Converter
- Effects of Uniform and Gradient High Magnetic Fields on Gravity Segregation in Aluminum Alloys
- Influences of Flow Intensity, Cooling Rate and Nucleation Density at Ingot Surface on Deflective Growth of Dendrites for Al-based Alloy
- Prediction of Solidification Microstructure and Columnar-to-equiaxed Transition of Al-Si Alloy by Two-dimensional Cellular Automaton with "Decentred Square" Growth Algorithm
- The Use of Fundamental Process Models in Studying Ladle Refining Operations
- Effect of Entrance Nozzle Design on the Fluid Flow in an Ingot Mold during Filling