スポンサーリンク
Div. Of Applied Process Metallurgy Dep. Of Materials Sci. And Engineering Royal Inst. Of Technol. (k | 論文
- Effect of Oxide Catalyst on Heterogeneous Nucleation in Fe-10mass%Ni Alloys
- Some Aspects on Grain Refining Additions with Focus on Clogging during Casting
- Size Distribution of Deoxidation Products with Ti, Pr and Ti/Pr in Fe-10mass%Ni Alloy
- Effects of Uniform and Gradient High Magnetic Fields on Gravity Segregation in Aluminum Alloys
- Influences of Flow Intensity, Cooling Rate and Nucleation Density at Ingot Surface on Deflective Growth of Dendrites for Al-based Alloy
- Prediction of Solidification Microstructure and Columnar-to-equiaxed Transition of Al-Si Alloy by Two-dimensional Cellular Automaton with "Decentred Square" Growth Algorithm
- Formation Conditions of Mg_2TiO_4 and MgAl_2O_4 in Ti-Mg-Al Complex Deoxidation of Molten Iron
- Solidified Structure Control of Metallic Materials by Static High Magnetic Fields
- Prediction of Solidification Paths for Fe-C-Cr Alloys by a Multiphase Segregation Model Coupled to Thermodynamic Equilibrium Calculations
- Restrictions of Physical Properties on Solidification Microstructures of Al-based Binary Alloys by Cellular Automaton
- Equilibrium Relationship between the Oxide Compounds in MgO-Al_2O_3-Ti_2O_3 and Molten Iron at 1873K
- Degree of Undercooling and Contact Angle of Pure Iron at 1933K on Single-crystal Al_2O_3, MgO, and MgAl_2O_4 under Argon Atmosphere with Controlled Oxygen Partial Pressure
- Liquid-Solid Interface Free Energies for Metals from Free-volume Method and Interface Structural Model
- Influence of Oxide Particles and Residual Elements on Microstructure and Toughness in the Heat-Affected Zone of Low-Carbon Steel Deoxidized with Ti and Zr